Shop

Product Description Lowara 5SC8 Scuba Pump APPLICATIONS Water supply from primary water supply tanks or reservoirs, 6 wells, basins and watercourses. Sprinkler irrigation systems. Pressure boosting with pump directly inserted in tank or well. Rain water harvesting. Car washing system. Pressurization on board ship Air purification/humidification systems Filtration systems Water recycling systems CHARACTERISTIC DATA Delivery: up to 10,8 m3/h at 2850 rpm. Head: up to 100 m at 2850 rpm. Motor power: 0,55 to 2,2 kW. Maximum operating pressure: 10 bar. Single-phase version: 220-240 V, 50 Hz 2 poles (2850 rpm). With built-in automatic reset overload protection. Cable Length 20m Mid Curve Performance 4.2m3 (70l/min) @6.3bar OPERATING CONDITIONS Temperature of pumped liquid: Standard version: 0 to 40C/Potable water version: 0 to 23C. Vertical/Horizontal installation Maximum immersion depth: 17m Maximum permissible quantity of suspended sand: 25 g/m3 Maximum quantity of chloride at 20C: 200 PPM Passes solids: 1SC: up to 1 mm, 3SC, 5SC, 8SC: up to 2 mm CONSTRUCTION CHARACTERISTICS The liquid end is located underneath the electric motor, which is cooled by the pumped liquid. Impellers are radial centrifugal type, made of technopolymer. Diffusers, outer sleeve, motor casing, suction screen and shaft extension are made of stainless steel. Head is made of microcasted stainless steel. Ease of installation and maintenance due to plug-in power supply cable and float switch Potable water version available upon request. The electric motor is protected by a double seal system with an oil chamber. Sand abrasion resistant impellers New Lowara Model # Old Model Equivalent 3SC4 2SC5 3SC5 2SC7 3SC7 SC209 3SC8 2SC11 5SC4 4SC7 5SC5 4SC9 5SC6 4SC11 5SC8 4SC11*w/Higher Pressure* Click for Product Brochure